Nikon Transfer Software Download Mac
2021年1月29日Download here: http://gg.gg/o2ir2
*Download firmware for Nikon digital products (firmware being the built-in software that controls cameras and other devices). To view descriptions, cautions, and download and installation instructions, click “View download page”.Note that a card reader or other equipment may be required for some firmware updates.
*Open up your iPhoto or whatever program, and then plug your camera into the computer, and a pop-up should appear, and then click on the upper left stuff and drop down menu should be there where you can choose to Add To Library or something like that or tell the computer you want to save the files.
Before proceeding, be sure you have installed ViewNX-i (0Installing ViewNX-i).
*
Connect the USB cable.
After turning the camera off and ensuring that a memory card is inserted, connect a USB cable (available separately) as shown and then turn the camera on.
USB Hubs
Connect the camera directly to the computer; do not connect the cable via a USB hub or keyboard.
Use a Reliable Power Source
To ensure that data transfer is not interrupted, be sure the camera battery is fully charged.
Connecting Cables
Be sure the camera is off when connecting or disconnecting interface cables. Do not use force or attempt to insert the connectors at an angle.
*
Start Nikon Transfer 2 component of ViewNX-i.
If a message is displayed prompting you to choose a program, select Nikon Transfer 2.
During Transfer
Do not turn the camera off or disconnect the USB cable while transfer is in progress.
Windows 7
If the following dialog is displayed, select Nikon Transfer 2 as described below.
*
Under Import pictures and videos, click Change program. A program selection dialog will be displayed; select Nikon Transfer 2 and click OK.
*Double-click .
Windows 10 and Windows 8.1
Windows 10 and Windows 8.1 may display an AutoPlay prompt when the camera is connected. Tap or click the dialog and then tap or click Nikon Transfer 2 to select Nikon Transfer 2.
macOS/OS X
If Nikon Transfer 2 does not start automatically, confirm that the camera is connected and then launch Image Capture (an application that comes with macOS or OS X) and select Nikon Transfer 2 as the application that opens when the camera is detected.
*
Click Start Transfer.
Pictures on the memory card will be copied to the computer.
Start Transfer
*
Terminate the connection.
When transfer is complete, turn the camera off and disconnect the USB cable.Download Nikon Transfer
For More Information
Consult online help for more information on using ViewNX-i.
Transferring photos from your Nikon D3100, D5100, or D7000 to your computer. After you connect the camera to the computer or insert a memory card into your card reader, your next step depends, again, on the software installed on your computer and the computer operating system.Notices
*• This software is for current owners of Camera Control Pro 2. For new users, it functions as a trial version that, once installed, can be used for up to 30 days before purchase is required.
*• This software is distributed as a file named “S-CCPRO_-023300WF-ALLIN-ALL___.exe”. Download and run the file to perform the update.
*• When performing the update, you may be required to enter the product key to confirm ownership.
*• Before beginning installation, exit Camera Control Pro 2 and all other applications, including any anti-virus software.
*• When performing the update, log in to an account with administrator privileges.
*• The interface after the update will be in the same language as the current software and cannot be changed.
*• If you are using D5 “C” firmware version 1.20 or later, update Camera Control Pro 2 to the current version, as versions 2.25.0 or earlier will not function as expected.
*• Users of the D5500 (firmware C version 1.01 or later) or the D5300 (firmware C version 1.01 or later) who use the Windows edition of Camera Control Pro 2 are requested to upgrade to the current version, as versions 2.22.0 or earlier will no longer detect the camera.
*• If you initiate movie recording using camera controls, a warning may be displayed; close the dialog before ending recording.
*• Read the information below before proceeding.Product DescriptionNameCamera Control Pro 2 Version 2.33.0File nameS-CCPRO_-023300WF-ALLIN-ALL___.exeCopyrightNikon CorporationArchive typeSelf-extractingReproductionNot permittedOperating system
*Microsoft Windows 10 Home
*Microsoft Windows 10 Pro
*Microsoft Windows 10 Enterprise
*Microsoft Windows 8.1
*Microsoft Windows 8.1 Pro
*Microsoft Windows 8.1 Enterprise Note: Pre-installed versions only. 64- and 32-bit editions supported.CPUIntel Celeron, Pentium 4, or Core series, 1 GHz or betterRAM1 GB or more (1.5 GB or more recommended)Hard-disk spaceA minimum of 500 MB available on the start-up disk (1 GB or more recommended)Monitor
*Resolution: 1024 × 768 pixels (XGA) or more
*Colors: 24-bit color (True Color) or moreInterfaceBuilt-in USB port required. May not function as expected if camera is connected via a USB hub.Supported cameras
*Z 7, Z 7II, Z 6, Z 6II, Z 5, Z 50, D6, D5, D4S, D4, D3X, D3S, D3
*Df, D850, D810, D810A, D800, D800E, D780, D750, D700, D610, D600
*D500, D300S, D300, D7500, D7200, D7100, D7000, D5600, D5500, D5300, D5200, D5100, D5000, D90, Nikon 1 V3 (“C” firmware version 1.10 or later) Note: Some of the above products may not have been announced or released in all countries or regions. Notes
* • To users of cameras other than the D3, D700, D300S, D300, D5000, and D90: The Explorer, Nikon Transfer 2, and other software will not show the pictures stored on memory cards inserted in the camera. The pictures will be displayed when you exit Camera Control Pro 2.
* • Using AF-F with D4, D800, D800E, D610, D600, D7100, D7000, D5500, D5300, D5200, D5100, and Df cameras: The focus point will not be recorded in the photo information for pictures taken using the Shoot button while AF-F is selected for autofocus mode. Except in the case of the D5200, the focus point will be recorded with pictures taken using the AF and Shoot button, but note that pictures cannot be taken using the AF and Shoot button when AF-F is selected with the D7000.Changes from Version 2.32.0 to 2.33.0
*• Added support for the Z 7II and Z 6II.Nikon Transfer Software Download Mac SoftwareInstallationNikon Transfer Windows 10 Download
*Create a folder on the hard disk and name it as desired.
*Download S-CCPRO_-023300WF-ALLIN-ALL___.exe to the folder created in Step 1.
*Run S-CCPRO_-023300WF-ALLIN-ALL___.exe to launch the installer.
*Follow the on-screen instructions to complete installation.
Download here: http://gg.gg/o2ir2
https://diarynote-jp.indered.space
*Download firmware for Nikon digital products (firmware being the built-in software that controls cameras and other devices). To view descriptions, cautions, and download and installation instructions, click “View download page”.Note that a card reader or other equipment may be required for some firmware updates.
*Open up your iPhoto or whatever program, and then plug your camera into the computer, and a pop-up should appear, and then click on the upper left stuff and drop down menu should be there where you can choose to Add To Library or something like that or tell the computer you want to save the files.
Before proceeding, be sure you have installed ViewNX-i (0Installing ViewNX-i).
*
Connect the USB cable.
After turning the camera off and ensuring that a memory card is inserted, connect a USB cable (available separately) as shown and then turn the camera on.
USB Hubs
Connect the camera directly to the computer; do not connect the cable via a USB hub or keyboard.
Use a Reliable Power Source
To ensure that data transfer is not interrupted, be sure the camera battery is fully charged.
Connecting Cables
Be sure the camera is off when connecting or disconnecting interface cables. Do not use force or attempt to insert the connectors at an angle.
*
Start Nikon Transfer 2 component of ViewNX-i.
If a message is displayed prompting you to choose a program, select Nikon Transfer 2.
During Transfer
Do not turn the camera off or disconnect the USB cable while transfer is in progress.
Windows 7
If the following dialog is displayed, select Nikon Transfer 2 as described below.
*
Under Import pictures and videos, click Change program. A program selection dialog will be displayed; select Nikon Transfer 2 and click OK.
*Double-click .
Windows 10 and Windows 8.1
Windows 10 and Windows 8.1 may display an AutoPlay prompt when the camera is connected. Tap or click the dialog and then tap or click Nikon Transfer 2 to select Nikon Transfer 2.
macOS/OS X
If Nikon Transfer 2 does not start automatically, confirm that the camera is connected and then launch Image Capture (an application that comes with macOS or OS X) and select Nikon Transfer 2 as the application that opens when the camera is detected.
*
Click Start Transfer.
Pictures on the memory card will be copied to the computer.
Start Transfer
*
Terminate the connection.
When transfer is complete, turn the camera off and disconnect the USB cable.Download Nikon Transfer
For More Information
Consult online help for more information on using ViewNX-i.
Transferring photos from your Nikon D3100, D5100, or D7000 to your computer. After you connect the camera to the computer or insert a memory card into your card reader, your next step depends, again, on the software installed on your computer and the computer operating system.Notices
*• This software is for current owners of Camera Control Pro 2. For new users, it functions as a trial version that, once installed, can be used for up to 30 days before purchase is required.
*• This software is distributed as a file named “S-CCPRO_-023300WF-ALLIN-ALL___.exe”. Download and run the file to perform the update.
*• When performing the update, you may be required to enter the product key to confirm ownership.
*• Before beginning installation, exit Camera Control Pro 2 and all other applications, including any anti-virus software.
*• When performing the update, log in to an account with administrator privileges.
*• The interface after the update will be in the same language as the current software and cannot be changed.
*• If you are using D5 “C” firmware version 1.20 or later, update Camera Control Pro 2 to the current version, as versions 2.25.0 or earlier will not function as expected.
*• Users of the D5500 (firmware C version 1.01 or later) or the D5300 (firmware C version 1.01 or later) who use the Windows edition of Camera Control Pro 2 are requested to upgrade to the current version, as versions 2.22.0 or earlier will no longer detect the camera.
*• If you initiate movie recording using camera controls, a warning may be displayed; close the dialog before ending recording.
*• Read the information below before proceeding.Product DescriptionNameCamera Control Pro 2 Version 2.33.0File nameS-CCPRO_-023300WF-ALLIN-ALL___.exeCopyrightNikon CorporationArchive typeSelf-extractingReproductionNot permittedOperating system
*Microsoft Windows 10 Home
*Microsoft Windows 10 Pro
*Microsoft Windows 10 Enterprise
*Microsoft Windows 8.1
*Microsoft Windows 8.1 Pro
*Microsoft Windows 8.1 Enterprise Note: Pre-installed versions only. 64- and 32-bit editions supported.CPUIntel Celeron, Pentium 4, or Core series, 1 GHz or betterRAM1 GB or more (1.5 GB or more recommended)Hard-disk spaceA minimum of 500 MB available on the start-up disk (1 GB or more recommended)Monitor
*Resolution: 1024 × 768 pixels (XGA) or more
*Colors: 24-bit color (True Color) or moreInterfaceBuilt-in USB port required. May not function as expected if camera is connected via a USB hub.Supported cameras
*Z 7, Z 7II, Z 6, Z 6II, Z 5, Z 50, D6, D5, D4S, D4, D3X, D3S, D3
*Df, D850, D810, D810A, D800, D800E, D780, D750, D700, D610, D600
*D500, D300S, D300, D7500, D7200, D7100, D7000, D5600, D5500, D5300, D5200, D5100, D5000, D90, Nikon 1 V3 (“C” firmware version 1.10 or later) Note: Some of the above products may not have been announced or released in all countries or regions. Notes
* • To users of cameras other than the D3, D700, D300S, D300, D5000, and D90: The Explorer, Nikon Transfer 2, and other software will not show the pictures stored on memory cards inserted in the camera. The pictures will be displayed when you exit Camera Control Pro 2.
* • Using AF-F with D4, D800, D800E, D610, D600, D7100, D7000, D5500, D5300, D5200, D5100, and Df cameras: The focus point will not be recorded in the photo information for pictures taken using the Shoot button while AF-F is selected for autofocus mode. Except in the case of the D5200, the focus point will be recorded with pictures taken using the AF and Shoot button, but note that pictures cannot be taken using the AF and Shoot button when AF-F is selected with the D7000.Changes from Version 2.32.0 to 2.33.0
*• Added support for the Z 7II and Z 6II.Nikon Transfer Software Download Mac SoftwareInstallationNikon Transfer Windows 10 Download
*Create a folder on the hard disk and name it as desired.
*Download S-CCPRO_-023300WF-ALLIN-ALL___.exe to the folder created in Step 1.
*Run S-CCPRO_-023300WF-ALLIN-ALL___.exe to launch the installer.
*Follow the on-screen instructions to complete installation.
Download here: http://gg.gg/o2ir2
https://diarynote-jp.indered.space
コメント